Satori with ANT+ external cadence sensor

[HP1970]

Hello one question,

I use a Satori Smart Trainer. How is the cadence determined?

I had an idea and wanted to have an external ANT + cadence sensor run during training in order to get accurate values. He recognized him, but the (no!) cadence was not displayed!

Tip?

Greetings Hans-Peter

[mcorn]

Hello one question,

I use a Satori Smart Trainer. How is the cadence determined?

I had an idea and wanted to have an external ANT + cadence sensor run during training in order to get accurate values. He recognized him, but the (no!) cadence was not displayed!

Tip?

Greetings Hans-Peter

You need to turn off the cadence signal from the Satori. You can't have two cadence signal sources at the same time. You should be able to unclick Satori cadence on the Device Manager page.

[HP1970]

Hello one question,

I use a Satori Smart Trainer. How is the cadence determined?

I had an idea and wanted to have an external ANT + cadence sensor run during training in order to get accurate values. He recognized him, but the (no!) cadence was not displayed!

Tip?

Greetings Hans-Peter

You need to turn off the cadence signal from the Satori. You can't have two cadence signal sources at the same time. You should be able to unclick Satori cadence on the Device Manager page.

Hello Michael,
thanks for the Tip, but i do that. it doesn´t runs. the speed had no function......

[mcorn]

I am guessing you turned off speed rather than cadence. Cadence is a circular symbol. Speed is a dial with arrow symbol. Below is a screenshot with cadence turned off. After you turn off cadence, you have to turn device search on by hitting the "search" button in the upper right of the Device Manager screen. Your separate cadence sensor should appear. Be sure it is active and sending out a signal by turning your crank.

TDA Symbols - Cadence Off.jpg (7.39 KiB) Viewed 7718 times

[HP1970]

I think the problem is, that the Satori smart use Watt, Cadence and Speed together